Sonir Remote

Sonir Remote measures your listening position and sends a room correction to Sonir Bench. Bench plays the sweep through your own system. The phone records it, turns it into a frequency response and an automatic PEQ, and sends back only the filter settings. The recording never leaves the phone. How it works - Connect: pick your Sonir Bench from the list of Benches on the same network. Next time it reconnects on its own. If it does not appear, scan the QR code Bench shows. - Microphone: choose the input and load a calibration file (UMIK, REW, FRD). Optional. - Level: play a test tone and set your amplifier so the input sits between -12 and -6 dBFS. - Measure: Bench plays the sweep and the phone records it. Add positions to average them. - EQ: choose a target curve (Flat, Tilt, Harman, B&K) and a limit, and send the automatic PEQ to Bench. Measure through the current correction to compare…