PinLevel: Pinball Leveler

Set your pinball machine to the exact pitch it was designed for. PinLevel reads front-to-back pitch and side-to-side level to 0.1°, then tells you which leg to turn and by how much - in millimetres and bolt turns, not guesswork. A generic bubble level tells you "not level". PinLevel tells you "raise the back left leg one and a half turns". LEVEL IT PROPERLY • Live readout of pitch and side-to-side to 0.1°, colour-coded green when you're inside tolerance and yellow when you're close. • Presets for the angles the games were built around - Easy 5°, Standard 6.5°, Fast 7° - or a custom target from 3° to 8°. • Per-leg guidance on a top-down diagram of the machine: raise, lower or hold, with an estimated amount in mm and turns for your leg thread pitch. • It walks the real-world method: side-to-side first, then pitch on the rear legs, then re-check - because each one moves the other.…